Structural Health Monitoring 2015

System Reliability for Verification and Implementation

Edited by Fu-Kuo Chang and Fotis Kopsaftopoulos, Department of Aeronautics and Astronautics, Stanford University

Proceedings of the Tenth International Workshop on Structural Health Monitoring, September 1–3, 2015

978-1-60595-275-8, September 2015, 3,220 pages, two volumes, 6×9, Hardcover or Online Book

 

Structural Health Monitoring 2015
  • Selected research on the entire spectrum of structural health techniques and areas of application
  • Available in print, complete online text download or individual articles.

Series book comprising two volumes provides selected international research on the entire spectrum of structural health monitoring techniques used to diagnose and safeguard aircraft, vehicles, buildings, civil infrastructure, ships and railroads, as well as their components such as joints, bondlines, coatings and more. Includes special sections on system design, signal processing, multifunctional materials, sensor distribution, embedded sensors for monitoring composites, reliability and applicability in extreme environments. The extensive contents can be viewed below.

Research in these volumes was initially presented in September 2015 at the 10th International Workshop on Structural Health Monitoring (IWSHM), held at Stanford University and sponsored by the Air Force Office of Scientific Research and the National Science Foundation.

VOLUME 1

Preface

KEYNOTE PRESENTATIONS

Applications of Structural Health Monitoring Technology in Asia
C. K. SOH, V. G. M. ANNAMDAS and S. BHALLA
SHM-Enriched High Speed Rail Systems
Y.-Q. NI

AEROSPACE STRUCTURES

A Framework for Damage Tolerance and Optimization of Stiffened Panels
M. JRAD, S. B. MULANI and R. K. KAPANIA
An Energy-weighted Factor Based Localization Method for On-line Wireless Impact Networking Monitoring
Y. REN, S. YUAN, L. QIU and H. MEI
Analysis of Loading Effects on Guided Ultrasonic Waves and Damage Assessment in a Full-scale CFRP Fuselage Structure
B. ECKSTEIN, M. BACH and M. M. BONET
Applicability of a UK MASAAG Guidance Paper to F-35 SPHM Evolution Process
I. HEBDEN, S. DIEHL, J. MCFEAT and H. AZZAM
Application of Electromagnetic Acoustic Emission on an Aluminum Plate with Crack
L. FEIFEI, D. OZEVIN and L. LI
Cost Wise Readiness Enabled Through Condition Based Maintenance Plus (CBM+)
J. KENNEDY, J. CARTER and M. CARTER
Detection of Impact Damages in Composite Stiffened Ribs by a PZT Network
A. LOZANO-MARTIN, J. GARCIA-ALONSO, A. FERNANDEZ-LOPEZ, M. IGLESIAS,
F. RODRIGUEZ-LENCE and A. GUEMES
Experimental Fabrication and Nondestructive Testing of Carbon Fiber Beams for Delaminations Using Embedded Terfenol-D Particles
J. RUDD and O. MYERS
Fatigue Cracks Detection and Their Growth Monitoring During Fatigue Test of a Helicopter Tail Boom
M. DZIENDZIKOWSKI, K. DRAGAN, A. KURNYTA, S. KLIMASZEWSKI, A. LESKI
and G. VALLONE
Feasibility of a Guided Wave-based SHM Technique for Stiffeners Disbond Detection
B. LAMBOUL, J. BUE and D. OSMONT
Integrated Structural Health Monitoring System for Civil Aircraft Structures
X. P. QING, H. SUN and M. LU
Internal Strain Monitoring of Composite Materials with Microstructed Optical Fiber Bragg Grating Sensors
C. SONNENFELD, G. LUYCKX, S. SULEJMANI, T. GEERNAERT, S. EVE,
F. BERGHMANS and M. GOMINA
Large Deflection Prediction of Simplified Wing for Antenna Signal Compensation
S. PARK, H. LEE, IN.-G. KIM and M.-S. KIM
Monitoring Manufacturing of Composites Using Embedded Distributed Optical Fibre Sensors
D. M. SANCHEZ, M. GRESIL and C. SOUTIS
Monitoring of Perturbations in Aeronautical Structures and Its Application in Active Vibration Control
J.-M. RODRIGUEZ-FORTUN, J. ORUS, M. ESCOLANO and J. SAUMELL
ROC and Cost Curves for SHM Performance Characterization in a Multilevel Damage Classification Framework: Application to Impact Damage in Aircraft Composites Structures
A. APICELLA, G. COTTONE, L. DE MARCHI, U. HECKENBERGER and A. MARZANI
SHM Certification Requirements for Military Aircraft-An Australian Perspective
S. GALEA and N. RAJIC

BIO-INSPIRED SENSORS AND NETWORKS, SMART SENSOR TECHNOLOGIES
A Haptic Approach for Impact Detection on Airplane Wings
H. K. JUNG, M. J. LEE, C. W. LEE and G. PARK
Citizen-Engaged Structural Health Monitoring Using Smartphone Sensors
E. OZER and M. Q. FENG
Evaluation of Different Topologies of Integrated Capillaries in Effective Structural Health Monitoring System Produced by 3D Printing
M. STRANTZA, R. VAFADARI, D. DE BAERE, M. ROMBOUTS, I. VANDENDAEL,
H. TERRYN, M. HINDERDAEL, A. REZAEI, W. VAN PAEPEGEM, P. GUILLAUME
and D. VAN HEMELRIJCK
Influence of the Relative Humidity to the Damage Detection Effectiveness of an ITO/PMMA Nanocomposite Film Sensor
B. E. TAKIUTI, V. LOPES, JR., M. J. BRENNAN and M. O. ORLANDI
Real-time Time-frequency Spectrogram Construction Based on Mimicry of Human Auditory Systems
R. YAO and J. P. LYNCH

BONDLINE MONITORING
Bond Line Monitoring Technology for Aircraft CFRP Structure Using Lamb Wave
K. TAKAHASHI, H. SOEJIMA, M. NAKAJIMA, Y. OKABE, N. TAKEDA and H. KOJIMA
Bondline Integrity Monitoring of Adhesively Bonded Structures via an Electromechanical Impedance Based Approach
Y. ZHUANG, F. KOPSAFTOPOULOS and F.-K. CHANG
Damage Assessment in Adhesively Bonded Structures by Using Smart SHM
A. PREISLER, Z. SADEGHI, A. ADOMEIT and K.-U. SCHRODER
Finite Element Analysis of Quantitative Percussion Diagnostics for Evaluating the Strength of Bonds Between Composite Laminates
S. POVEROMO, D. MALCOLM and J. EARTHMAN
Study on Adhesive Bonds Influence on EMI Signatures
P. MALINOWSKI, T. WANDOWSKI and W. OSTACHOWICZ

CIVIL STRUCTURES
40 KM Reach Distributed FBG Sensing System for Oil and Gas Pipeline, Railway and Subway, and Geological Features
H. HUNG
A New Model for Predicting Fatigue Damage
M. H. HAFEZI and T. KUNDU
A Suggestion of Health Monitoring for the Road Bridge Floor with Fiber Optic Sensor
Y. KAWANO, T. MIKAMI and K. IKUSHIMA
Analysis of Stress Corrosion Crack Growth and Related Structural Reliability Considerations
D. LEE
Application of Structural Health Monitoring System for Long-span Cantilever Steel Truss Bridges
T. MIYASHITA, E. IWASAKI, M. NAGAI and D. G. GARCIA
Challenges in Damage Detection Based on Finite Element Analyses and Monitoring of Dynamic Curvature of Concrete-steel Composite Structures
M. DOMANESCHI, D. SIGURDARDOTTIR and B. GLISIC
Comparison of Identified Models for Static Deformation of Arch Dam
J.-S. LEW and C.-H. LOH
Compensation of Environmental Effects on Modal Properties by Second Order Blind Source Separation Techniques
C. RAINIERI and G. FABBROCINO
Conductive Polymer-based TDR Sensing Ice Accretion for Wind Turbine Blade
Q. GAO, M. KELLEY and X. YU
Deferred Cost Savings for an Inventory of Bridges Using SHM
B. WESTCOTT and D. THOMSON
Diagnostics of Buildings Including Crack Detection
A. STANIEK
Dynamic Monitoring of Nuclear Reactor Protection Shell
G. BOLDYEV and A. ZHIVAEV
Embedded Interface Debonding Detection for an Irregular Complex Multi-chamber Steel Reinforced Concrete Column with PZT Impedance
B. XU, Z. SHU and S. J. DYKE
Embedding Numerical Models into Wireless Sensor Nodes for Structural Health Monitoring
K. DRAGOS and K. SMARSLY
Experimental Validation of Structural Damage Identification Using Vibration Transmissibility
X. HE and H. TANG
Fatigue Crack Identification and Lifetime Prediction for Steel Bridge Deck Structures
L. PAHLAVAN, R. PIJPERS, H. HAKKESTEEGT, R. JANSEN and W. PEELEN
Field Monitoring of Reinforced Concrete Closure Strip Behavior with Wireless Sensors
A. BRAULT, N. HOULT, T. GREENOUGH, I. TRUDEAU, S. MASOUD and B. CHARNISH
Heterogeneous Data Fusion for Traffic-induced Excitation Identification of Truss Bridges
H. SUN and O. BUYUKOZTURK
HIL Excitation in the Damage Assessment of a Timber Footbridge
S. CASCIATI, L. FARAVELLI and F. CASCIATI
Identifications of Structural State Parameters of Concrete Columns with Self-sensing Basalt-fiber-reinforced Polymer Bars
Z. WU and H. HUANG
Maturation of Real-time Active Pipeline Integrity Detection System for Natural Gas Pipelines
J. BERGMAN, H. CHUNG, F. LI, D. ZHANG, V. JANAPATI, C. CHEUNG and A. BINING
Monitoring Early Age Properties of Cementitious Material Using Ultrasonic Guided Waves in Embedded Rebar
H. SUN and J. ZHU
Monitoring of Rail Bridge Displacements Using Digital Image Correlation
A. J. HOAG, N. A. HOULT, W. A. TAKE and H. LE
Monte Carlo Localization and Multiple Vision Sensor Based 6-DOF Displacement Measurement System for the Rendezvous of PC Bridge Members
W. MYEONG, S. CHOI and H. MYUNG
Prospect of Structural Health Monitoring Application for Offshore Wind Farm in Taiwan
C.-F. CHEN, H.-H. HUANG, H. WU and C.-L. TSAI
Pulse Phase Thermography Inspection of Bond Defects in Environmentally Conditioned FRP-to-Concrete Specimens
N. MABRY, R. SERACINO and K. PETERS
Scour Genius: Monitoring Scour Effects on Structures
S. SCHORN and B. KROELY
SHM-based Service Safety Evaluation of Dashengguan Bridge on Beijing-Shanghai High Speed Railway
Z. SHI and Q. PU
State of the Art of Geodetic Bridge Monitoring
W. LIENHART and M. EHRHART
Structural Safety Monitoring System for Intertidal Zone Wind Turbine Tower
Z. MING, T. DONGYUE, S. XINMEI, Z. JIAN and L. YING
Towards a Population-based SHM: A Case Study on an Offshore Wind Farm
E. PAPATHEOU, N. DERVILIS, E. A. MAGUIRE, I. ANTONIADOU and K. WORDEN
Validation of Finite Element Models of Existing Concrete Dams, Through Monitoring Data
M. COLOMBO, M. DOMANESCHI and A. GHISI
Validation of Long-Term Data from FBG Temperature Sensors
H. ABDEL-JABER and B. GLISIC
Wind Driven Damage Localization in a High-rise Building
M. P. LIMONGELLI, L. MARTINELLI and A. ZAMBRANO

DIAGNOSTICS
A Combined Model-Based Identification and Model Validation Approach for Damage Identification
R. J. MADDEN, A. H. PESCH and J. T. SAWICKI
A Local Sensor Configuration for Multiscale Damage Detection in an Aluminum Beam Alloy Structure with a Loose Bolt Joint
I. T. GEORGIOU
A Novel Modal Strain Method for Damage Detection in SHM Based on FBG and iFEM
H. YANG, Z. WU and P. SUN
A Novel Probabilistic Diagnostic Algorithm-Based Damage Localization for Aluminum Plates with Non-uniform Sections
J. ZHAO, X. MIAO, F. LI and H. LI
A Numerical Study for Damage Detection of a Thin Plate Using Pseudo Local Flexibility Method with Rotary Measurement
T.-Y. HSU, W.-I. LIAO and Y-C. SHI
A Validation Study for a Crack-Detected Method by Intelligent Coating Under Operational Environment
M. LIU, L. LI and J. SUN
An Abnormal Detection Analysis for Shield Tunnel SHM Based on Fuzzy Cluster Method
F. ZHOU, W. ZHANG, K. SUN and B. SHI
Autonomous Mobile Inspection System for Detecting Hidden Voids in LNG Carrier Triplex Bonding Layers
S. LEE, H. J. LIM, H. SOHN, W. YUN and E. SONG
Composite Diagnostics with Use of Embedded PZT Transducers-A Smart Structure Example
K. DRAGAN, M. DZIENDZIKOWSKI, A. KURNYTA, M. SALACINSKI and A. LESKI
Damage Imaging of Aircraft Composite Structure Based on 2-D Cruciform PZT Array and Spatial-Wavenumber Filters
L. QIU, S. YUAN and B. LIU
Damage Localization in Composite Lattice Truss Core Sandwich Structures Based on a Curvature Mode Shape
B. LI, J. ZHOU, K. FENG and Z. LI
Detection and Characterization of Cracks Using Lamb Wave Propagation
B. PODDAR and V. GIURGIUTIU
Development of a State-related Evaluation for Diagnostic-oriented Data Filtering Approach
S. ROTHE and D. SOFFKER
Development of the USACE Automated SMART Gate System for Lock Gates: Detection of Barge Impact Events Using Statistical Process Control
M. D. SMITH, Z. R. TREECE, S. L. BUNKLEY and V. P. CHIARITO
Evaluation of Multiple Damage-Mode Models for Prognostics of Carbon Fiber-reinforced Polymers
MATTEO CORBETTA, ABHINAV SAXENA, MARCO GIGLIO and KAI GOEBEL
Identification of Multi-impact Locations Using Metal-core Piezoelectric Fiber Rosettes
H. WANG, J. QIU, H. JI, C. ZHANG and J. ZHAO
Improvement and Comparison of Wear-oriented State-of-health Classification Methods Using Optimization Techniques
S. ROTHE, A. LEITE, P. PADRAO and D. SOFFKER
Influence of Loading on the Near Field Based Passive Metamaterial in Structural Health Monitoring
V. G. M. ANNAMDAS and C. K. SOH
Integrated FBG Sensor Responses and Full Field Thermo-elastic Stress Approach to Monitor Damage Accumulation in Glass Fibre Reinforced Composite Plates
A. KAKEI, J. A. EPAARACHCHI, N. RAJIC, J. LENG, M. ISLAM and G. KAHANDAWA
Investigation of Ultrasonic Feature Guided Waves for the Monitoring of Structural Bends
X. YU, P. MANOGHARAN, Z. FAN and P. RAJAGOPAL
Quality Assessment for the EMI-based Inspection of PWAS
I. BUETHE and C.-P. FRITZEN
Research on Monitoring and Forecasting Method of Fatigue Damage in the Hot Spots of the Metallurgy Crane
K.-Q. DING, G.-S. LIU, L. CHEN, G. CHEN and F.-F. KONG
Research on Propagation of Guided Wave in Narrow Plate and Damage Detection
J. QIU and F. LI
Signal-based Fault Prognosis Approach Based on Time-frequency Analysis Applied to Industrial Data
A. ROTHER, M. JELALI and D. SOFFKER
Structural Damage Identification in an Aeronautical Panel Exploring the PCA and Delaunay Triangulation
M. A. DE OLIVEIRA, J. V. FILHO, V. LOPES, JR. and D. J. INMAN
Ultrasonic Quantification of Volume Loss in Thick-Wall Components
P. GONG, T. R. HAY, D. W. GREVE, W. R. JUNKER and I. J. OPPENHEIM
ELECTROMECHANICAL IMPEDANCE BASED METHODS
A Statistical Approach for Assessing Reliability for Impedance-based Structural Health Monitoring Using Probability of Detection
D. DE SOUZA RABELO, V. STEFFEN, JR., R. M. F. NETO and H. B. LACERDA
An Integrated SHM System Based on Electromechanical Impedance and Guided Ultrasonic Waves
P. RIZZO, V. GULIZZI and A. MILAZZO
Evaluation of the E/M Impedance Method as a SHM Technique for Large Civil Aircraft Spoilers: Analytical, Numerical and Experimental Studies Performed with Simple Structures
C. VIECHTBAUER, T. ERLINGER and M. SCHAGERL
Online Electro-mechanical Impedance-based Structural Tamper Detection
A. CATTANEO, P. SANILA, K. A. MILLER, C. R. FARRAR, E. B. FLYNN and D. D. L. MASCARENAS
PCA-based Method for Damage Detection Exploring Electromechanical Impedance in a Composite Beam
M. A. DE OLIVEIRA and D. J. INMAN
Smart Wireless Sensor Node for Impedance-Based SHM Applications with Multi-Sensor Capability and Automatic Compensation for Temperature Effects
N. E. CORTEZ, J. VIEIRA FILHO and F. G. BAPTISTA

ENVIRONMENTAL EFFECTS
A Framework for Damage Detection under Varying Temperature Effects Using Artificial Neural Networks and Time Series Analysis
B. KOSTIC and M. GUL
An Acousto-Ultrasonics Pattern Recognition Approach for Damage Detection Under Variable Temperature Conditions
M. A. TORRES-ARREDONDO, D. A. TIBADUIZA-BURGOS and J. S. PEREZ
Development of a Multi-Functional Installed Ultrasonic System for Detection of Pitting Corrosion and Bolt Loosening on Aerospace Vehicles
J. BERGMAN, F. LI, H. CHUNG, V. JANAPATI, A. KUMAR, D. FURSTINGER
and A. TIMMONS
Effect of Load and Temperature Changes on Nonlinear Ultrasonic Measurements: Implications for SHM
V. K. CHILLARA, H. CHO, M. HASANIAN and C. J. LISSENDEN
Fatigue Property of Accelerated Corroded High-Strength Steel Wires in Laboratory and Naturally Corroded Bridge Wires from Replaced Cables
S. LI, Y. XU and H. LI
Non-stationary Random Coefficient Models for Vibration-based SHM in Structures Influenced by Strong Operational and Environmental Variability
L. D. AVENDANO-VALENCIA and E. N. CHATZI
Structural Condition Assessment in a Prestressed Concrete Bridge Based on Analysis of Environmental Effects on Long-term Strain Monitoring Data
M. NISHIO, J. XU and J. MIZUTANI
Structural Damage Detection Using Modal Frequencies Under Temperature Variability with Modified Auto-Associative Neural Network Technique
J. GU and M. GUL
Temperature Effects on Strains of a Continuous Box-Girder Bridge with a Long-Term Monitoring System
C. CHEN, Z. WANG, M. R. KALOOP and Q. GAO
The Long Term Performance of a Guided Wave SHM System on a Steel Tank
M. R. COURTIER, A. J. CROXFORD and K. ATHERTON

MODELLING AND SIMULATION
An Explicit Time Domain Spectral Finite Element for Guided Wave SHM in Composite Plate Strips with Physically Modelled Active Piezoelectric Sensors
C. REKATSINAS, T. THEODOSIOU and D. SARAVANOS
Analysis and Optimization of Pipeline Assembly and Correcting Based on Finite Element Technology
Z. LU, W. DAI, J. CHU and Y. ZHAO
Efficient Numerical Simulation Method for Lamb Wave Propagation and Its Verification
J. M. V. PEREZ and F. RADDATZ
Multi-Physics Modeling and Simulation of a Frequency Doubling Antenna Sensor for Passive Wireless Strain Sensing
C. CHO, X. YI, Y. WANG and M. M. TENTZERIS
Multiscale Flow Modeling and Simulation to Predict Void Formation and Transport in Composite Manufacturing
M. YEAGER, P. SIMACEK and S. ADVANI
Simulation of Guided Wave Inspections Using Hybrid Modal/Finite Element Formulation: Application to a SHM System for Pipe Monitoring with Complex Geometries
V. BARONIAN, K. JEZZINE and B. CHAPUIS
Structural Identification of Large Finite Element Models Using Commodity Computing Clusters for Parallel Genetic Algorithms
M. J. WHELAN, T. P. KERNICKY and N. S. ZAMUDIO
Wave Propagation in Fluid Loaded Thin Walled Waveguides
M. MAZZOTTI, J. CUADRA, A. KONTSOS and IVAN BARTOLI

SENSORS/ACTUATORS
A Design Strategy to Improve the Directivity of Wavenumber-Spiral Frequency-Steerable Acoustic Transducers
L. DE MARCHI, N. TESTONI and A. MARZANI
A Gyroscope Free Inertial Measurement Unit for Human Gesture Recognition and Applications: A Preliminary Study
Y. YANG, D.-L. CHOW and X. YU
A Low-Cost, Wireless Chemiluminescence-Based Deformation Sensor for Soil Movement and Landslide Monitoring
K. S. C. KUANG and Q. H. CAO
A Method of Displacement Measurement for Structural Constructions Based on the Microwave Radar and Active Transponder
D. ZHENG, W. CHEN, X. LIU, X. LEI, C. LI AND C. LI
A Motion Based Power Management Technique for Wireless Sensor Networks Deployed for SHM
V. CHANDRESAKARAN, E. OLSEN and E. SPENCE
A Multirotor-based Approach for Tap-testing Difficult-to-access Structures
D. MASCARENAS, A. GREEN, T. TROMBETTA and C. FARRAR
A Novel, Wireless Acceleration Evaluator Used for Health Monitoring of Aging Structures and Bridges
A. SABATO
Energy Harvesting Using Arrays of Granular Chains and Solid Rods
K. LI and P. RIZZO
Evaluation of the Performance of an Energy Harvesting Chain Based on Piezopolymer Sensors
N. A. CHRYSOCHOIDIS, E. GUTIERREZ and G. RENALDI
FE Tool for Drape Modelling and Resin Pocket Prediction of Fully Embedded Optical Fiber Sensor system
N. LAMMENS, G. CHIESURA, T. AHMED, A. BRODSJO, E. VOET, G. LUYCKX,
W. VAN PAEPEGEM and J. DEGRIECK
Influences of Adhesive Properties on Strain Measurement Results of Rayleigh Backscattering Based Fibre Optic Sensors
M. MAHL, M. FRIEMEL, L. CAPOBIANCO, A. HARIDAS and H. BAIER
Linear Guide with Material Integrated Strain Gauges for Structural Health Monitoring
G. HUMSTORFF, C. WINKELMANN and W. LANG
Multifunctional Magneto-Au/mSiO2 Core-shell Nanoparticles for Advanced Theranostics: Synthesis and Modeling
Y. WANG, P. SMITH and M. YUAN
Optical Fiber Sensors, MEMS Accelerometers and Acoustic-based Non-Destructive Technique: Three High-ends and Complementary Technologies for Advanced SHM Applications
M. CARMONA, G. LAFFONT, M. JULES, B. CHAPUIS, A. PALEOLOGUE
and M. BILLERES
Optimized Actuator/Sensor Combinations for Structural Health Monitoring: Simulation and Experimental Validation
R. S. VENKAT, C. BOLLER, N. B. RAVI, N. CHAKRABORTY, G. S. KAMALAKAR,
K. UKIRDE and D. R. MAHAPATRA
Performance Evaluation of FBG Sensors under Fatigue and Weathering
A. RAHMATIAN, A. BAGCHI and M. NOKKEN
RFID Sensing Platform in Structure Deformation Monitoring
M. LISOWSKI, P. GONEK, K. GRABOWSKI, T. UHL and W. STASZEWSKI
Structural Health Monitoring Applications of Ultrasonic Surface Wave Generating Inter-digital Transducer (IDT)
J. K. NA and T. KANG
Structural Optimization of a Piezoelectric Transducer for Selective Guided Wave Excitation
M. MISZCZYNSKI, T. STEPINSKI, T. UHL and P. PACKO
Subharmonic Resonance of Geometrical Nonlinear Structure in 2-D Periodic Elastic System for Mechanical Wave Filtering
C. LI, Z. LIU, M. LI, H. LI, Y. LI and W. K. LIU
Wireless Sensor Network for Structural Health Monitoring by Means of Lamb-Waves
M. SALAS, O. FOCKE, G. STOLTENBERG, A. S. HERRMANN and W. LANG

SHM-BASED STRUCTURAL DESIGN
Assessing the Performance of a High Damping Rubber Bearing in Beyond-design Conditions
M. DOMANESCHI, L. MARTINELLI, F. PEROTTI and M. TOMASIN
Design and Supply of a SHM Based Condition Assessment of Critical Structures System Using the Techniques of Corrosion and Stray Current Monitoring on the Cityringen Metro Project in Copenhagen
T. GOODERHAM, G. JOHN, S. VILES and B. STIPAC
Design of a Corrosion Detection System for a Shelter Structure
T. C. NULL, D. L. PARKER and J. VREULS
Optimal Placement of Fiber Optical Sensors along Zero-strain Trajectories to Detect Damages in Thin-walled Structures with Highest Sensitivity
M. SCHAGERL, C. VIECHTBAUER and M. SCHABERGER
SHM Enabled Design: Application to Damage Tolerance Design with Bonded, Composite Joints
P. LIDDEL and P. FOOTE
Ultra-lightweight Composite Stiffened Panel Designed Based on SHM and Rapid Repair System
S. MINAKUCHI, K. YOKOTA and N. TAKEDA

SIGNAL PROCESSING
A Computationally Compact Algorithm for Real-time Detection of Abrupt Structural Stiffness Degradations
Y. LEI, H. ZHOU and Z.-L. LAI
Animation Future Prediction Method by PCA and SST
K. DAMACHI
Application of Acceleration-based Damage Detection Algorithms to Experimental Data from Multi-story Steel Structures
Y. LIAO, K. BALAFAS, A. KIREMIDJIAN, R. RAJAGOPAL and C.-H. LOH
Application of Multifractal Detrended Fluctuation Analysis for Structural Health Monitoring
H. FAJRI and T.-K. LIN
Application of SHM Pattern Recognition to Assess Decision Making of Humans in the Loop
J. J. MEYER, W.-L. HU, Z. WANG, D. E. ADAMS, T. REID and A. CHATURVEDI
Clustering Studies for Damage Detection in Bridges: A Comparison Study
A. SANTOS, E. FIGUEIREDO and J. COSTA
Comparative Study of Two Hardware Development Boards for Implementation of PCA-based Algorithms in Structural Damage Detection
J. CAMACHO-NAVARRO, M. L. RUIZ, O. PEREZ-GAMBOA, R. VILLAMIZAR-MEJIA
and L. E. MUJICA
Content Adaptive Signal Compression for Remote SHM and NDT Operation
M. SCHAARSCHMIDT, C. WESTERKAMP, A. HENNEWIG, D. PIEPER, H. SPECKMANN
and W. BISLE
Health Monitoring of Corrosion Control Coatings Used on Ship Tanks and Enclosures
K. FARINHOLT, G. BUNGET, H. REES and F. FRIEDERSDORF
Modified Compressive Sensing-based Migration for GPR Probing of Reinforced Concrete Bridge Decks
X. WEI, J. ZHOU and Y. ZHANG
Noise Reduction Methods for Hammering Impact Acoustic Inspection: An Experimental Comparison
J. YE, M. IWATA, M. MURAKAWA, T. HIGUCHI, Y. KUBOTA and T. YUI
Non-planar Ising Graphical Model for Efficient Inference in Structural Health Monitoring
R. MOHAMMADI-GHAZI and O. BUYUKOZTURK
Principal Component Analysis and Self-organizing Maps for Damage Detection and Classification under Temperature Variations
M. A. VEJAR, D. A. TIBADUIZA-BURGOS, M. A. TORRES-ARREDONDO and F. POZO
Spread Spectrum Pulse Coding in Lamb Wave Inspections
L. DE MARCHI, A. MARZANI, J. MOLL, P. KUDELA, M. RADZIENSKI
and W. OSTACHOWICZ
Structural Diagnostics via Anomaly-driven Demixing of Wavefield Data
J. DRUCE, M. KADKHODAIE, J. HAUPT and S. GONELLA
Updating the Mathematical Models of Bridges Using Data-driven Techniques
A. SABAMEHR, C. LIM and A. BAGCHI
Using the Subharmonic Resonance to Detect Bolted Joint Looseness
M. ZHANG, J. ZHOU, W. QU, L. XIAO and X. CHEN

SYSTEM IDENTIFICATION
An Approach in Dynamic Monitoring Using Long-gage Fiber Optic Sensors
K. KLIEWER and B. GLISIC
Damage Precursor Detection Using Nonlinear Dynamic Parameters and Micromechanics
E. HABTOUR, D. P. COLE, A. DASGUPTA and M. ROBESON
Decentralized Damage Detection under Ambient Excitations with Random Decrement Functions
P. NI and Y. XIA
Dynamics Analysis and Controller Design of a Quadrotor-based Wall-climbing Robot for Structural Health Monitoring
J.-U. SHIN, D. KIM, S. JUNG and H. MYUNG
Examples of Output-only Modal Identification Using Compressive Sensing Techniques
A. ZEBADUA, P.-O. AMBLARD, E. MOISAN, O. MICHEL, M. CARMONA,
A. PALEOLOGUE and M. BILLERES
Experimental Identification of Structural Dynamics and Aeroelastic Properties of a Self-sensing Smart Composite Wing
F. KOPSAFTOPOULOS, R. NARDARI, Y.-H. LI, P. WANG, B. YE and F.-K. CHANG
Increasing the Efficiency of Blind Source Separation Methods for Improved Modal Parameter Estimation
P. BREWICK and A. W. SMYTH
Long-term Dynamic Response of Hagia Sophia in Istanbul to Earthquakes and Atmospheric Conditions
E. CAKTI and E. DAR
Modal Analysis of a Full-scale Four-story Reinforced-concrete Base-isolated Building Subjected to Random and Simulated Earthquake Shake Table Excitations
P. T. BREWICK, J. BARRIOS HERNANDEZ, W. M. ELHADDAD, E. A. JOHNSON,
R. E. CHRISTENSON, E. SATO and TOMOHIRO SASAKI
Modelling the Damage Monitoring Capability of Conductive Glass/Epoxy Laminates
P. A. CARRARO, F. PANOZZO, M. QUARESIMIN and M. ZAPPALORTO
Monitoring Early Damage Initiation of Very High Cycle Fatigued Composite Material Using a Nonlinearities Based Inverse Approach
S. BAGCHI, R. SRIDARAN, C. BOLLER, P. STARKE and M. MITRA
Novel Reduced Model Based Damage Detection of Frame Structures
D. ZHANG and H. LI
Parametric Identification of a Cable-stayed Bridge under Earthquake Excitation Using LSE and Substructure Approaches
H. HUANG, Y. YANG and L. SUN
Study of Vibration Based SHM Technologies, Part IV: Localization Using Physical-based Methods
J. B. HANSEN, M. K. HOVGAARD, P. OLSEN, A. SKAFTE and R. BRINCKER
Wave-propagation and Transfer-matrix Approach for System Identification
E. AFAK and E. CAKTI

VIBRATION-BASED SHM
Comparing Three Derivative Discontinuities Detection Methods for the Localisation of Cracks in Beam-like Structures
N. CORRADO, C. SURACE, L. MONTANARI and A. SPAGNOLI
Comparison on Identification and Damage Detection Method Using Output-only Measurement: Application to Bridge Monitoring During Scouring Test
C.-H. LOH, W.-T. HSU, S.-F. CHEN and C.-K. CHAN
Damage Detection in a Laboratory Model Using a Nonlinear Constraint Satisfaction Processor for Finite Element Model Updating
T. P. KERNICKY, M. J. WHELAN, U. RAUF and E. AL-SHAER
Detection of Stiffness and Mass Changes Separately Using Time Series Analysis with Output-only Vibration Data
N. T. DO and M. GUL
Experimental Evaluation of Vibration-based Damage Identification Methods on a Composite Aircraft Structure with Internally-mounted Piezo Diaphragm Sensors
J. HWANG, R. LOENDERSLOOT and T. TINGA
Healing Assessment of Fractured Femur: Orthopaedic SHM
W. H. ONG, W. K. CHIU, M. RUSS and Z. K. CHIU
Impact Force Identification of Isogrid-stiffened Panels Using Experimental Transfer Matrices
S. ATOBE, H. TANAKA and H. FUKUNAGA
Long Sensor Layers for Machinery Monitoring
F. LI, J. LI, H. CHUNG, C. CHEUNG, K. KETTUNEN, T. PIKANEN and A. KUMAR
Nonlinear Vibro-acoustic Interactions for Crack Detection in Beams
D. BRODA, L. PIECZONKA, V. HIWARKAR, W. J. STASZEWSKI and V. V. SILBERSCHMIDT
Rail-infrastructure Monitoring through the Dynamic Response of a Passing Train
G. LEDERMAN, H. Y. NOH and JACOBO BIELAK
Shock of Vibration-based Technologies, Part II: Detection
M. K. HOVGAARD, J. B. HANSEN, A. SKAFTE, P. OLSEN and R. BRINCKER
Shock of Vibration-based Technologies, Part I: Experimental Setup and Automated Identification
P. OLSEN, M. K. HOVGAARD, J. B. HANSEN, A. SKAFTE and R. BRINCKER

SPECIAL SESSION: ACOUSTIC EMISSION IN AEROSPACE APPLICATIONS
Acoustic Emission Based Damage Characterization in Composite Plates Using Low-velocity Impact Testing
S. KIM, B. UPRETY, D. O. ADAMS, V. J. MATHEWS and J. B. HARLEY
Acoustic Emission Monitoring of Crack Propagation in Titanium Samples
M. STRANTZA, D. DE BAERE, P. GUILLAUME, D. VAN HEMELRIJCK
and D. G. AGGELIS
Acoustic Emission of 3D Angle Interlock Glass Fibre Composites
M. GRESIL, M. SALEH, M. ARSHAD and C. SOUTIS
Acoustic Emission-based Impact Location Estimation for Composite Structures
J. ZHOU, V. J. MATHEWS and D. O. ADAMS
Acoustic Emissions from Damage Mechanisms in Composites
B. MILLS-DADSON, K. ASAMENE, T. WHITLOW and M. SUNDARESAN
Damage Evaluation for Aircraft CFRP Components Using Piezoelectric Sensing
R. AUSTIN, M. K. ELBATANOUNY and P. H. ZIEHL
Damage Identification Using Acoustic Emission Data Obtained from Large Composite Structures
J. AWERBUCH, D. OZEVIN, A. KHANOLKAR and T.-M. TAN
Generic Methodology for Validating Acoustic Emission Structural Health Monitoring Installations
D. GAGAR and P. FOOTE
Modeling on Propagation of Shock Waves Induced by Hypervelocity Impact (HVI) with Application to Evaluation of HVI Damage
M. LIU, Z. SU, Q. ZHANG and R. LONG
Optimization of Acoustic Source Localization in Large Plates
K. GRABOWSKI, H. NAKATANI, M. GAWRONSKI, P. PACKO, W. J. STASZEWSKI, T. UHL
and T. KUNDU
Strong Interference Denoising Method for the Multiple Damage Acoustic Emission Signals of the Aircraft Composite Structures
S. DONG, M. YUAN, L. YU, B. NIU and Z. JIAO

VOLUME 2

SPECIAL SESSION: CIVIL SHM STANDARDISATION—PROGRESS AND STATUS
A NoSQL-based Data Management Infrastructure for Bridge Monitoring Database
S. JEONG, Y. ZHANG, J. P. LYNCH, H. SOHN and K. H. LAW
A Tale of Two Tunnels—Understanding the Performance of Existing and New Tunnels during Construction Works
M. Z. E. B. ELSHAFIE, C. Y. GUE, N. DE BATTISTA, M. ALHADDAD, M. WILCOCK,
K. SOGA and R. J. MAIR
Activities of the Italian UNI-WG06 on Standardization in SHM
A. E. DEL GROSSO
An Update on a Large Scale SHM Deployment on Sydney’s Harbour Bridge and Associated Research Activities
P. RUNCIE
British Columbia Smart Infrastructure Monitoring System (BCSIMS)
Y. KAYA and C. VENTURA
Comparative Damage Detection in the IASC-ASCE Benchmark Structure Using SHETM
E. K. ERVIN
Seismic Retrofitting and Structural Health Monitoring of a Masonry Vault by using GFRP Grids with Embedded FBG Sensors
V. GATTULI, F. POTENZA, J. TOTI and F. VALVONA
SHM Using Eulerian-based Virtual Visual Sensors: Introduction of a New Black-and-white Target for Improved SNR
A. SHARIATI and T. SCHUMACHER
Structural Health Monitoring of Unique Structures: Normandy and Tancarville
S. SCHORN and N. CORTES
The e-Bridge 2.0 Approach for SHM of Bridges in Costa Rica
G. ORTIZ and C. GARITA

SPECIAL SESSION: EMBEDDED SENSORS FOR DETECTING DAMAGE IN COMPOSITES
Assessment of Embedded Fiber Bragg Gratings for Structural Health Monitoring of Composites
M. TODD, M. YEAGER, C. KEY and W. GREGORY
Carbon Nanotube Appliques for Fatigue Crack Diagnostics
S. S. KESSLER, G. THOMAS, M. BORGEN and C. T. DUNN
Design of Embedded FBG Sensor System for Ultralight Aircraft Wing Monitoring
M. DVORAK, M. RUZICKA and M. KABRT
Finite Element Modeling of PVDF Matrix Carbon Fiber Composites
M. A. GREMINGER and G. HAGHIASHTIANI
Guided Wave Sensing with Fiber Bragg Grating Optic Sensors and Embedment
Z. TIAN, X. SUN, L. MA, B. LIN and L. YU
Impact Damage Identification in Glass Fiber/Epoxy Laminates with Carbon Black Filler via Electrical Impedance Tomography
T. N. TALLMAN and K. W. WANG
Impact Localization Monitoring of the CFRP Composite Plate Based on Low-sampling Rate FBF Sensors by SVM
Z. PANG, M. YUAN, H. SONG and W. WANG
In-situ Strain and Damage Sensing in Glass Fiber Laminates Using Embedded CNT
S. DATTA, M. Y. FARD, J. P. JOHNSTON, E. QUIGLEY and A. CHATTOPADHYAY
Internal Defect Detection in Composite Plates on Demand
M. RUTNER, D. DONSKOY, J. PAVLOV and R. BESSER
Maximum Strain Detection of Structures Using Fiber Optic BOCDA Sensor with Aluminum Foil Packaged Optical Fiber
I.-B. KWON and B.-H. CHOI
Rapid Processing of Full-spectral Data from Embedded FBG Sensors
K. PETERS and S. WEBB
Screening Failure Detection of Structural Composite Systems: Embedded Triboluminescent Structronic Wires
K. JOSHI, J. B. FRKETIC, M. RALEY, D. OLAWALE, T. DICKENS and O. OKOLI
Sensitive Skin Based on pH Sensitive Smart Materials for Crack Detection
F. CAMCI
Structural Health Monitoring of an America’s Cup Sailing Catamaran Using Embedded FBG Sensors
A. SIGG, D. COSTANTINI and A. MENDEZ
Towards an Unified Approach for Guided Ultrasonic Wave Dispersion Curves in Metallic and Composites Materials
D. BARAZANCHY and V. GIURGIUTIU

SPECIAL SESSION: GUIDED WAVES IN STRUCTURES FOR SHM
A Boundary Element Formulation for Modelling Structural Health Monitoring Applications
F. ZOU, I. BENEDETTI and M. H. ALIABADI
A Finite Wavelet Domain Method for the Rapid Simulation of Wave SHM Systems in Composite Plate Strips for Impact and Damage Detection
N. CHRISTOS, T. THEODOSIOU, C. REKATSINAS and D. SARAVANOS
Adaptive Reverberation Suppression Techniques for SHM in Composite Materials
V. ROSA, V. LOPES JR., E. FLYNN, M. TODD and C. FARRAR
An Insight into High-order Harmonic Generation of Lamb Waves Induced by a Breathing Crack Using a Spring Model and a Local Interaction Simulation Approach
R. RADECKI, Z. SU and L. CHENG
Analytical Investigation of the Interaction of Rayleigh and Lamb Waves at a Delamination-like Discontinuity in a Thick Plate
C. SCHAAL, S. ZHANG, H. SAMAJDER and A. MAL
Application of the PCA to Guided Ultrasonic Waves to Evaluate Tensile Stress in a Solid Rod
J. Q. MENDEZ, R. V. MEJA, J. L. Q. PINEDA, L. E. MUJICA and M. RUIZ
Characterization of Guided Waves Propagation in a Composite Skin-stringer Assembly
M. H. SHERAFAT, R. GUITEL, N. QUAEGEBEUR, L. LESSARD, P. HUBERT
and P. MASSON
Development of a Hyperelastic Transversely Isotropic Materials Law for the Simulation of the Higher Harmonic Lamb Wave Generation in Composite Structures
N. RAUTER and R. LAMMERING
Development of Integrated Process and Structural Health Monitoring System Based on Piezosensors for CFRP Reinforcements Made by Resin Transfer Molding
M. SCHEERER, Z. SIMON, M. MARISCHLER, T. ROSER and B. RITTENSCHOBER
Effect of Piezoelectric Transducer Bonding on Time Reversibility of Lamb Waves in Plates
J.K. AGRAHARI and S. KAPURIA
Guided Wave Displacement Validation for SHM Applications Using Air Coupled Ultrasonic Scanning Technique
A. SZEWIECZEK, C. HEINZE and M. SINAPIUS
Guided Wavefield Reconstruction from Sparse Measurements Using Compressed Sensing
O. MESNIL, H. YAN, M. RUZZENE, K. PAYNABAR and J. SHI
Implementation of the Surface Response to Excitation (SuRE) Method with DSP’s for Detection of the Damage of Thick Blocks
H. FEKRIMANDI, I.N. TANSEL, R. GONZALEZ, S. ROJAS, D. MEILLER, K. LINDSAY,
A. BAGHALIAN and S. TASHAKORI
Independent Component Analysis for Improved Defect Detection in Guided Wave
J. DOBSON and P. CAWLEY
Investigating Efficiency of Non-linear Wave Modulation Spectroscopy for Early Detection of Critical Buckling Damages in Sandwich Composite Panels
N.A. CHRYSOCHOIDIS and E. GUTIERREZ
Lamb Wave Based Structural Damage Detection Method Using Bayesian Updating
J. YANG, J. HE and W. ZHANG
Lamb Waves Mode Decomposition Using the Cross-wignerville Distribution
A.B. ZOUBI, V.J. MATHEWS, J.B. HARLEY and D.O. ADAMS
Modal Based Damage Indicators for Monitoring of Delamination and Disbond in Composite Structures Using Linear Array Transducers
B. REN and C.J. LISSENDEN
Multi-frequency Approach to Imaging Damage in Stiffened Structures Exhibiting Multi-path Reflections
E. CHAN, L.R.F. ROSE and C.H. WANG
Multi-path Exploitation in a Sparse Reconstruction Approach to Lamb Wave Based Structural Health Monitoring
A. GOLATO, S. SANTHANAM, F. AHMAD and M.G. AMIN
Optimization of PZT Rebar Active Sensing System and Its Application for CA Mortar Layer Fell-off Detection
N.N. SONG and F. WU
Phased Array Quantitative Imaging of Fatigue Cracks Based on Linearly Dispersive Signal Construction
J. CAI, S. YUAN and X.P. QING
Practical Evaluation of SHM Damage Detection Under Complex Environmental Conditions Using Receiver Operating Characteristics
C. LIU, J. DOBSON and P. CAWLEY
Quantitative Characterization of the A0 Scattered Field Due to Edge Delaminations as a Function of the Through Thickness Position
N. NADARAJAH, B.S. VIEN, L.R.F. ROSE and W.K. CHIU
Scattering of the Symmetrical Edge-guided Wave by a Small Edge Crack in an Isotropic Plate
B.S. VIEN, N. NADARAJAH, L.R.F. ROSE and W.K. CHIU
Selection of Structural Features for the Systematic Study of Guided Wave Propagation and Interaction with Damage
P-C. OSTIGUY, M.H. SHERAFAT, D.R. FRANCA, N. BOUSLAMA, N. QUAEGEBEUR,
A. MASLOUHI, L. LESSARD, P. HUBERT, M. VIENS, M.R. MOFAKHAMI, Z. HAJJAR
and P. MASSON
Structural Health Monitoring Platform for Sensorised Composite Structures
Z. SHARIF-KHODAEI, M. THIENE and M.H. ALIABADI
The Influence of Stiffeners on the Propagation of Guided Ultrasonic Waves
C. SCHAAL, X. CAO and A. MAL
Towards Passive Guided Wave Tomography of Extended Defects Using Ambient Elastic
Noise Cross-correlations
T. DRUET, M. JULES, B. CHAPUIS, G. LAFFONT and E. MOULIN
Towards the Deployment of Acoustoultrasonics-based SHM in Industry
L. SHUBERT, M. BACH, U. BERGER, I. BUETHE, C.-P. FRITZEN, H. JUNG, U. LIESKE
and F. RADDATZ
Ultrasonic Guided Wave Sensor Network Optimization for Monitoring Rivet Line
N.B. RAVI, N. CHAKRABORTY and D.R. MAHAPATRA

SPECIAL SESSION: MONITORING AND HEALTH MANAGEMENT OF HIGH-SPEED RAILWAYS
AET-based Pattern Recognition Technique for Rail Defect Detection
X.-Z. LIU, Y.-Q. NI, W.-L. WU, Y.-F. PEI, Y.-H. HOU and D.-Y. QIN
Application and Prospect of Fiber Bragg Grating Sensing Technology in Structural Health Monitoring of High-speed Train
S.-Q. LIU, W.-J. WANG, L. MA and Z.-Y. JU
Applications of Structural Health Monitoring on Intelligent High-speed Train
J-Y. LIANG and X-J. DENG
Chinese Turnout Crack Monitoring System of High-speed Railway
P. WANG, J. XIAO, X. SHENG and D. QIN
Cylindrical Guided Wave Approach for Damage Detection in Hollow Train Axles
A. ZIAJA, L. CHENG, R. RADECKI, P. PACKO and W. STASZEWSKI
Damage Allocation for Railway Rails Using PZT Sensors
Y. SONG and F. WU
Empowering the QA Technician with Intuitive 3D Optical Inspection Tools
P. BOTTCHER, E. KLAAS and A. CHHABRA
Magnetoelectric Wireless Condition Monitor for Trackside Monitoring of Train Traction Systems
S.W. OR, C.M. LEUNG, S.L. HO and K.Y. LEE
Monitoring of Mission Critical Components of Railways Using Smart Railway System
K.-K. LEE, H.-Y. TAM and S.-L. HO
Monitoring of Temperature Gradient Effects on the Mechanical Behavior of a Real Ballastless Track Structure
X. CHAPELEAU, L-M. COTTINEAU, T. SEDRAN, A. BRISSON, S. KOLODZIEJSKI,
C. MASSON and J. CAILLIAU
Outlier Detection in Sensor-assisted Online Ride Comfort Assessment of High-speed Trains
Y.-Q. NI, X.-Z. LIU, W.-Z. ZHAO and S.-L. LIANG
Research on Fatigue Crack Detection of Rail Vehicle Axle Based on Acoustic Emission
X.-J. DENG, G.-J. XUI and S.-Q. LIU
Research Progress in Structural Health Monitoring of Axle Box Bearings in Highspeed Train
J.-Y. LIANG, H.-T. LI and L. MA
Some Techniques for the Performance Evaluation of Railway System
C.-Y. WANG, H.-C. TSAI, H.-L. WANG and R.-Z. WANG
Temperature Monitoring of High-speed EMU Equipment Based on Simulation Analysis and FBG Sensors
Y.-C. DING, Z.-M. JI, W.-Z. ZHAO and D.-P. WANG
Train Wheel Condition Monitoring by Rail Pad Sensor
S.L. ZHANG, C.G. KOH and K.S.C. KUANG
Virtual Fatigue Test Method for the Fatigue Life Prediction of Welded Structure in Railway Vehicle Based on the Virtual Strain Gauge Technology
W.-Z. ZHAO, J. FANG, J.-T. LI, S-Q. MA, S.-L. LIANG, X.-Z. MI and F. WANG

SPECIAL SESSION: MULTIFUNCTIONAL MATERIALS
A Remotely Readable, Self-authenticating Tamper Evident Seal Based on Graphene-based Materials and Compressive Sensing
A.N. MARCHI, A. CATTANEO, J. BOSSERT, J. DUMONT, S.J. SEE, G. GUPTA, C. FARRAR
and D. MASCARENAS
Carbon Nanotubes for Assessing the Structural Integrity of Composite Bonded Joints with Film Adhesives
C. GARCIA, M. SANCHEZ, A. URENA and J. RAMS
Characterization of Carbon Nanotube Strain Sensors Using Experimental Tests and Percolation Modeling
B.M. LEE, L. WANG and K.J. LOH
Composite Nanofibers for Structural Health Monitoring
P. SERVATI, S. SOLTANIAN, L.Y. WAN, D. BADAWY, Y. LI, K. WALUS, D. MICHELSON
and F. KO
Investigation on Large-area and Flexible PZT/PVB/additives Composite Films for New Piezoelectric Sensor Application
X. FANG, J. HE and Y. ZHANG
Long Term Electrical Characterization of Thermal Cycled Carbon Nanotube Thin Films
M.T. RIOSBAAS and B.R. LOYOLA
Mechanoluminescent Composites Towards Autonomous Impact Damage Detection of Aerospace Structures
D. RYU, N. CASTANO and K. VEDERA
Multifunctional Energy Storage Composites for SHM Distributed Sensor Networks
P. LADPLI, R. NARDARI, Y. WANG, P.A. HERNANDEZ-GALLEGOS, R. REWARI,
H.T. KUO, F. KOPSAFTOPOULOS, K.D. KEPLER, H.A. LOPEZ and F.-K. CHANG
Multiscale Modeling and Characterization of Stress-sensitive Mechanophore-embedded Nanocomposites
B. KOO, E. NOFEN, A. CHATTOPADHYAY and L. DAI
Piezoresistivity of Nickel Powder Filled Cement-based Composite
H. XIAO, G. WANG, M. LIU, H. LI, J. JIANG and J. OU

SPECIAL SESSION: PROBABILISTIC SHM
A Compressed Sensing Approach in Structural Damage Identification
S.G. SHAHIDI and S.N. PAKZAD
A Data-driven Bayesian Ascent Method for Maximizing Wind Farm Power Production
J. PARK, S. KWON and K.H. LAW
A Probabilistic Model for Quantifying Uncertainty of Acoustic Nonlinearities of Lamb Waves and Its Application to the Characterization of Damage in Composite Laminates
M. HONG, Z. MAO, M.D. TODD, Z. SU and X. QING
Aircraft Composite Structure Preventive Maintenance
D.L. COT, S. MUKHERJEE, M. MELGAR and R. GANGULI
An Operation Reliability Prediction Method for CNC Machine Tool Based on Hidden Markov Chain Model
J. WU, C. DENG, Y.M. ZHU and C.Y. WU
Damage Characterization in Concrete Jack Arch Bridges Using Symbolic Time Series Analysis
M.M. ALAMDARI, V.V. NGUYEN, P. RUNCIE and S. MUSTAPHA
Damage Detection Sensitivity, Specificity and Classification Data Analysis for SHM Systems Design, Verification and Validation
G.K. GEETHA, N.B. RAVI, N. CHAKRABORTY, K.C. UKIRDE, G.S. KAMALAKAR
and D.R. MAHAPATRA
Detecting Damage on Wind Turbine Bearings Using Acoustic Emissions and Gaussian Process Latent Variable Models
R. FUENTES, T. HOWARD, M.B. MARSHALL, E.J. CROS, R. DWYER-JOYCE,
T. HUNTLEY and R.H. HESTMO
USACE SMART Gate: Structural Health Monitoring to Preserve America’s Critical Infrastructure
Z.R. TREECE, M.D. SMITH, N.E. WIERSCHEM, S.C. SWEENEY and B.F. SPENCER, JR.
Efficient Bayesian Model Selection for Identifying Locally Nonlinear Systems Incorporating Dynamic Measurements
S. DE, E.A. JOHNSON, S.F. WOJTKIEWICZ and P.T. BREWICK
Enhanced Recursive Probabilistic Integration Method for Probabilistic Fatigue Life Management Using Structural Health Monitoring
T. CHEN and M. SHIAO
Identification of Barely Visible Impact Damages on a Stiffened Composite Panel with a Probability-based Approach
M.M. BONET, B. ECKSTEIN, R. LOENDERSLOOT and P. WIERACH
In-line Inspection of Pipelines by Using a Smart Pig (ITION) and Multivariate Statistical Analysis
M. RUIZ, L.E. MUJICA, M. QUINTERO, S. QUINTERO and J. FLOREZ
Leak Detection and Localization on Hydrocarbon Transportation Lines by Combining Real-time Transient Model and Multivariate Statistical Analysis
L.E. MUJICA, M. RUIZ and J.M. MEJIA
Mechanical Equivalent of Logical Inference for Structural Health Monitoring
D. BOLOGNANI, C. CAPPELLO and D. ZONTA
Motion Magnification Based Damage Detection Using High Speed Video
Y.-J. CHA, J.G. CHEN and O. BUYUKOTURK
Multiple Damage Identification Using the Reversible Jump Markov Chain Monte Carlo
D. TIBOACA, R.J. BARTHORPE, I. ANTONIADOU and K. WORDEN
Online Fatigue Damage Prediction for Metallic Structures Via Output Only Vibration Measurements
S.E. AZAM, C. PAPADIMITRIOU and E. CHATZI
Peaks Over Threshold Method for Structural Health Monitoring Detector Design
O. HMAD, N. MECHBAL and M. REBILLAT
Probabilistic Data-driven Assessment of Pavement Management Systems
Y.S.H. TARI and M.L. WANG
Probabilistic Fatigue Damage Prognosis Using a Surrogate Model Trained Via 3D Finite Element Analysis
P.E. LESER, J.D. HOCHHALTER, J.A. NEWMAN, W.P. LESER, J.E. WARNER,
P.A. WAWRZYNEK and F.-G. YUAN
Remaining Useful Life Estimations Using Acoustic Emissions
S. RAJARAM, U. GUCLU, P. ABRAHAM, S. ESOLA and A. KONTSOS
Sensor Placement Optimization for Structural Health Monitoring
C. MALINGS, M. POZZI and I. VELIBEYOGLU
SHM Using Acoustic Sources of Opportunity: Monitoring Green’s Correlations
R. VINCENT, M. CARMONA, O. MICHEL and J.-L. LACOUME
Structural Damage Detection Using Extended Kalman Filter Combined with Statistical Process Control in Nonlinear Systems
C. JIN, S. JANG and X. SUN
Structural Health Monitoring of Wind Turbine Blades Using Statistical Pattern Recognition
D.A. TIBADUIZA-BURGOS, M.A. TORRES-ARREDONDO and M. ANAYA
Study of Vibration Based SHM Technologies, Part III: Localization Using Statistical Learning Theory
M.K. HOVGAARD, J.B. HANSEN, A SKAFTE, P. OLSEN and R. BRINCKER
Susceptibility on the Strain Field Change as Function of the Coupling Between the Effect Produced by Damage Appearance and the Change in the Load Conditions
J. SIERRA-PEREZ, M.A. TORRES-ARREDONDO and A. GUEMES
System-level Inspection Scheduling: An Approach Based on Stochastic Future Allocation
M. MEMARZADEH and M. POZZI
The Influence of Redundant Structural System Characteristics on the Value of SHM Information
S. THONS
Uncertainty Quantification in Ultrasonic Wave Based Detection of Delamination in Composite Structures
R.K. MUNIAN, D.R. MAHAPATRA and S. GOPALAKRISHNAN

SPECIAL SESSION: ADVANCES IN ULTRASONIC AND ACOUSTIC EMISSION TECHNIQUES FOR SHM/NDE
A Novel Coda Wave Interferometry Calculation Approach Using Taylor Series Expansion
S. LIU, Z. WU, JI. ZHU and H. YANG
Advances in Smart Hangar and Its Real-world Applications
H.-J. SHIN, S.-C. HONG, C.T. TRUONG and J.-R. LEE
Damage Detection for Composites Using Time Reversal Method with Different Amplitudes of Excitation
J. ZHOU, Y. YANG, L. XIAO, W. QU and G. CHEN
Damage Localization in Plate-like Structures Using Guided Ultrasonic Waves Edge Reflections
A. EBRAHIMKHANLOU, B. DUBUC and S. SALAMONE
Detection and Quantification of Fatigue Cracks in Rail Steel Using Acoustic Emission Technique
D. LI, K.S.C. KUANG and C.G. KOH
Detection of Defects in Composites Using Vibro-acoustic Modulation
B.-Y. CHEN, S.-K. SOH, H.-P. LEE, T.-E. TAY and V.B.C. TAN
Development of Laser-powered Wireless Ultrasonic Device for Aircraft Structural Health Monitoring
M. CHOI, J.-R. LEE and C-Y. PARK
Development of Wireless Ultrasonic Propagation Imaging System
M.M. SHRESTHA, S.Y. CHONG and J.-R. LEE
Estimating the Mechanical Properties of Layered Media Using Ultrasonics: Numerical Study with High Resolution Wave Propagation
R. RASHETNIA and M. POUR-GHAZ
Impact Damage Imaging Using Non-contact ACT/LDV System
M. HARB and F.-G. YUAN
Nonlinear Damage Detection and Localisation Using a Time Domain Approach
S. BOCCARDI, D. CALLA, G.-P.M. FIERRO, F. CIAMPA and M. MEO
On-site Evaluation of Fatigue Damage in Concrete Bridge Deck with Innovative NDT
T. SHIOTANI, K.-C. CHANG, T. NISHIDA, H. NAKAYAMA, M. OHARA
and H. YATSUMOTO
Precursor Damage Inception Quantification
S. PATRA and S. BANERJEE
Recent Advances in the Ultrasonic Polar Scan Method for Characterizing (Degraded) Fiber Reinforced Plastics
M. KERSEMANS, A. MARTENS, W. VAN PAEPEGEM, S. DELRUE, J. DEGRIECK
and K. VAN DEN ABEELE
SHM of the Eyebars of the Old San Francisco Oakland Bay Bridge
R.S. GOSTAUTAS and T.A. TAMUTUS
Simulation of Guided Waves in CIVA Platform: Models for SHM of Composite Structures
B. CHAPUIS, K. JEZZINE, V. BARONIAN, L. TAUPIN and D. SÉGUR
Small Defect Detection Through Local Analysis of Acoustic Spatial Wavenumber
E.B. FLYNN, A.J. HAUGH and S.B. LOPEZ
Sparse Reconstruction of Flaw Signal from Noisy Ultrasonic Data: A Bayesian Framework
B. WU, Y. HUANG and H. LI
Tomographic Imaging of Structural Flaws with New Adaptive Weights on Array
S. STERNINI, T. V. NGUYEN and F.L. DI SCALEA
Ultrasonic Guided Wave Based Damage Detection Using Low-dimensional Data from Laser Doppler Scan
G.K. GEETHA and D.Y. MAHAPATRA

SPECIAL SESSION: RELIABILITY OF SHM
Establishing the Reliability of SHM Systems Through the Extrapolation of NDI Probability of Detection Principles
D. ROACH, T. RICE, S. NEIDIGK, D. PIOTROWSKI and J. LINN
Inverse Estimation for Damage Assessment in SHM: Moving Beyond the Probability of Detection
C.M.S. KABBAN, B.M. GREENWELL and M.M. DERRISO
Probability of Detection Assessment of a Guided Wave Structural Health Monitoring System
G. JARMER and S. KESSLER
SHM Reliability and Implementation Overview—A Personal Military Aviation Perspective
E. LINDGREN
Structural Health Monitoring (SHM) Reliability Workshop
P. SWINDELL

SPECIAL SESSION: SHM CERTIFICATION FOR AIRBORNE APPLICATIONS
Evaluation of Long-term Flight Data from On-board SMART Layers
V. JANAPATI, H. CHUNG, F. LI, A. KUMAR and S. HUANG
Developments Towards the Qualification of Two SHM Systems for S-SHM Application
R.P. RULLI and F. DOTTA
Guidance on Integrating Matured SHM Systems into UK Military Aircraft
H. AZZAM and J. MCFEAT
Implementation of Structural Health Monitoring (SHM) into an Airline Maintenance Program
D. PIOTROWSKI, D. ROACH, A. MELTON, J. BOHLER, T. RICE, S. NEIDIGK and J. LINN
Verification and Validation Framework for Certification of Integrated Vehicle Health Management and Prognostic Health Management
C. STOLZ and M. BUDERATH

SPECIAL SESSION: SHM TECHNOLOGY IN WIND TURBINES
Acoustic Emission Damage Detection for Wind Turbine Rotor Blades Using Airborne Sound
T. KRAUSE, S. PREIHS and J. OSTERMANN
Application of a Finite Element Model Updating Approach to Damage Localization at Offshore Wind Energy Converters
K. SCHRODER and R. ROLFES
Extreme Function Theory for SHM: A Case Study for Wind Turbines
E. PAPATHEOU, N. DERVILIS, E.A. MAGUIRE, C. CAMPOS, I. ANTONIADOU
and K. WORDEN
Framework for a Spectral Element Wind Turbine Model Development for Load and Damage Estimation
T.J. ARSENAULT, K. BLACK, K. JANOYAN and P. MARZOCCA
Impact Location Procedure for Composite Structure Using Rosette with 25 Degree Angles Between Sensors
S. OPOKA, K. MAJEWSKA, P. KUDELA and W. OSTACHOWICZ
Kalman Filter Based Data Fusion for Bi-Axial Neutral Axis Tracking in Wind Turbine Towers
R. SOMAN, P. MALINOWSKI, U. S. PAULSEN and W. OSTACHOWICZ
Long-term Prediction of Dynamic Responses on an Offshore Wind Turbine Using a Virtual Sensor Approach
A. N. ILIOPOULOS, W. WEIJTJENS, D. VAN HEMELRIJCK and C. DEVRIENDT
Monitoring of a 35 m Wind Turbine Rotor Blade During a Fatigue Test by a Modular SHM-Scheme
S. TSIAPOKI, M. W. HACKELL and R. ROLFES
Monitoring the Consumed Fatigue Life on Three Offshore Wind Turbines
W. WEIJTJENS, N. NOPPE, A. ILIOPOULOS and C. DEVRIENDT
Numerical Model Quality Assessment of Offshore Wind Turbine Supporting Structure Based on Experimental Data
M. KAHSIN and M. LUCZAK
Structural Health Monitoring Considerations on Offshore Wind Turbine Models
E. DI LORENZO, S. MANZATO, B. PEETERS, F. MARULO and W. DESMET
Vibration-based Damage Detection on a Blade of a Small Scale Wind Turbine
Y. OU, B. GRAUVOGL, M. SPIRIDONAKOS, V. DERTIMANIS, E. CHATZI and J. VIDAL
Vibration-based Ice Detection of Rotor Blades in Wind Turbines-—The Industrial Realization of an SHM-System
P. KRAEMER, H. FRIEDMANN and C. EBERT
Wear Aging and Related Impact on System Reliability
N. BEGANOVIC, D. BACCAR and D. SOFFKER
Wireless Monitoring and Spectral Analysis of a 3 kW Wind, Turbine for Condition Monitoring
Y. ZHANG, J. ZHANG, M. B. KANE, M. HÄCKELL, E. BYON, R. ROLFES
and J. P. LYNCH
Clustering of Vehicular Cable Tension of Cable-Stayed Bridge Under Normal Operation Conditions
S. WEI, S. LI and H. LI

SPECIAL SESSION: SHM WITHIN HARSH EXTREME
ENVIRONMENTS
Consideration of Thermal Effects in Electro-mechanical Impedance Measurement for Space Structures
M. L. ANDERSON, A. N. ZAGRAI, D. DOYLE, D. HENGEVELD and M. R. WILSON
Early Warning System Development for Highway Bridge Scouring
K.-C. CHANG, Y.-B. LIN and W.-T. CHOU
Fully-distributed Fiber Optic Sensor for Strain Measurement at High Temperature
Y. BAO and G. CHEN
Hypervelocity Impact Events—Who Cares?
S. CLOSE and D. HEERMANN
Laboratory Validation of a Piezoelectric Scour Monitoring Sensor
F. AZHARI, K. J. LOH and F. A. BOMBARDELLI
Modal Property-based Approach for Lateral Distribution Evaluation of Intact and Damaged Reinforced Concrete Bridge
Y. JIAO, H. LIU, X. WANG and G. LUO
NASA Prototype All Composite Tank Cryogenic Pressure Tests to Failure with Structural Health Monitoring
R. J. WERLINK and F. PENA
Research on Merging Signal Processing Based on Mode Separation for PZT Performance
Y. ZHU, T. MU and C. HE
Scour Monitoring on a Field Bridge Using FBG-based Instrumentation
X. KONG, C. S. CAI and J. HU
The Performance of a Surface-bonded PZT Sensor Based Rocket Tanks SHM System Under the Cryogenic Temperature Operating Environment
D. GAO, Z. WU, Y. ZHENG and L. YANG

SPECIAL SESSION: TECHNOLOGIES FOR HEALTH-CONSCIOUS AIRCRAFT AND MANEUVER
Damage Characterization and Classification for Composite Honeycomb Structures
V. JANAPATI, F. LI, R. IKEGAMI, C. CHEUNG, A. KUMAR and W. MILAN
Decision Making for Reference-Free Damage Detection
R. HAJRYA, F. KOPSAFTOPOULOS, S. ROY, P. LADPLI and F.-K. CHANG
Detecting Impacts on a Representative Aerospace Structure: An Implementation with Tests
S. BEMMENT, I. READ and P. HUBBARD
Exploring the Efficiency of BIGDATA Analyses in SHM
T. J. MATARAZZO, S. G. SHAHIDI and S. N. PAKZAD
Selecting Features for Data Based Damage Detection
J. LONG and O. BUYUKOZTURK
Structural Health Monitoring of a UAV Fleet Using Fiber Optic Distributed Strain Sensing
O. SHAPIRA, U. BEN-SIMON, A. BERGMAN, S. SHOHAM, B. GLAM, I. KRESSEL,
T. YEHOSHUA and M. TUR

SPECIAL SESSION: VERY DENSE ARRAYS OF SENSORS: 1D, 2D, AND 3D DISTRIBUTED AND QUASI-DISTRIBUTED SENSORS
Accurate Source Localization Using Highly Narrowband and Densely Populated MEMS Acoustic Emission Sensors
M. KABIR, H. SABOONCHI and D. OZEVIN
CLoVER Transducers for Static and Dynamic Strain Sensing
Y. SHEN, H. ZHANG and C. E. S. CESNIK
Crack Identification Using Sensing Sheets
Y. YAO and B. GLISIC
Damage Detection Using Smart Concrete Engineered with Nanocomposite Cement-Aggregate Interfaces
S. GUPTA, J. GONZALEZ and K. J. LOH
Dense Network of Large Area Electronics for Fatigue Crack Detection and Localization
S. LAFLAMME, J. VENS, D. QIAO, A. DOWNEY and J. LI
Detecting and Locating Defects in Coated Metallic Structures Using Arrays of Small Microwave Resonators
A. M. ALI and O. M. RAMAHI
Development of a Generalized Excitation Algorithm for Modeling Phased Array Acoustic Sensors Using Distributed Point Source Method
A. S. VEMPATI, V. DURGESH and R. AHMAD
Direct State-Space Models for Time-Varying Sensor Networks
T. J. MATARAZZO and S. N. PAKZAD
Distributed Fibre Optic Sensors for Stiffened Skin Panels Strain Monitoring and Failure Mode Detection
P. F. DIAZ-MAROTO, A. F. LOPEZ and J. A. GUEMES
Electrical Impedance Tomography-based Sensing Skin for Structural Health Monitoring
M. HALLAJI, A. SEPPANEN and M. POUR-GHAZ
Fatigue Damage Detection of Rib-to-Deck Welded Joints Using 5cm High-Spatial-Resolution DDP-BOTDA System
J. XU, Y. DONG, H. LI, S. LI, T. JIANG and M. XIA
High-resolution Distributed Fiber-optic Monitoring of Composite Beams Production
Y. LONDON, M. SILBIGER, Y. ANTMAN, L. EFRAIM, G. ADLER and A. ZADOK
Identification of Impact Force Based on Compressive Sensing in Large Structural Health Monitoring
D. LIANG and Z.-F. FAN
Long Distance Video Camera Measurements of Structures
J. G. CHEN, N. WADHWA, A. DAVIS, F. DURAND, W. T. FREEMAN
and O. BUYUKOZTURK
Mechanochromic Photonic Crystals for Structural Health Monitoring
A. PIOTROWSKA, V. PICCOLO, A. CHIAPPINI, M. FERRARI, M. POZZI, L. DESERI
and D. ZONTA
Morphopipe: Curvature Monitoring of Flexible Risers with MEMS Accelerometers
M. CARMONA, R. PERRIER, L. JOUANET, N. SAGUIN-SPRYNSKI and O. DELCROIX
Healing Assessment of Fractured Femur: Orthopaedic SHM
W. H. ONG, W. K. CHIU, M. RUSS and Z. K. CHIU
Clustering of Vehicular Cable Tension of Cable-Stayed Bridge Under Normal Operation Conditions
SHIYIN WEI, SHUNLONG LI and HUI LI

Index

Proceedings of the Tenth International Workshop on Structural Health Monitoring, September 1–3, 2015

978-1-60595-275-8, September 2015, 3,220 pages, two volumes, 6×9, Hardcover or Online Book

 

$245.00$284.50

You Save: $25.00

You Save: $64.50

Shipping Information Payment and Return Policy
ISBN: 978-1-60595-275-8 Categories: , ,

SHARE THIS PRODUCT: